Lean production, a small labeling machine can also be a new youth

The labeling work requires the uninterrupted sudden opening and stopping of the labeling axis, and the high requirements for the accuracy of the rotation angle, but at present, due to the serious problem of aging and wear of the equipment, the bottle label pasting position has a 3-5 mm error, affecting the beauty, at the same time, the bottle labels often appear mutual adhesion, broken labels and other failures, can not meet the product quality and capacity requirements.

Lean production, a small labeling machine can also be replaced by a new youth

After discovering the problem, the health care workshop staff communicated with several technical personnel, all of whom suggested replacing the aging labeling machine labeling axis assembly, at a cost of about 3,000 yuan. In order to save money, they carefully analyzed the principle and manual of the equipment, conducted equipment troubleshooting and online inquiries, and found that the equipment could be restored to normal by processing some parts. After demonstration and actual measurement, the machine can be added to the 2 labeling axis shrinkage sleeve and stepper motor shaft key slot to strengthen the fixed to ensure the accuracy of the labeling axis rotation.

With the joint efforts of everyone, the labeling machine resumed normal operation, and faults such as trademark sticking, large deviation and leakage were eliminated, and the deviation of bottle label was controlled within 1mm, which saved the company money.

Lean production, a small labeling machine can also be replaced with new youth

There are many such examples in the health care workshop. At the end of last year, the laser coding machine was transformed by the staff's own abandoned computer motherboard, saving more than 15,000 yuan; a connection pipe was added between the No. 1 circulation system and No. 2 circulation system in the water workshop to facilitate the cleaning and disinfection of the system and reduce the safety hazards caused by the secondary disinfectant, which reduced the production cost for the company. They said that they would continue to carry out the company's requirement of cost reduction and efficiency improvement at the beginning of the year. This ownership spirit is worth learning from all workshops.